风动潜水泵适用于含有甲烷或煤尘爆炸危险场所抽排污水用.
Pneumatic submersible pump is suitable for pumping and discharging sewage in places with explosion矿山开拓
掘井巷道
竖井井筒施工
风动潜水泵适用于含有甲烷或煤尘爆炸危险场所抽排污水用,可广泛应用于煤矿井下的作业面,输送含
有污物、煤粉泥沙等固体颗粒的地下水。叶轮采用特殊设计,它排污能力强,不会因固体颗粒或纤维物
的吸入而堵塞,也不会因颗粒性介质的吸入而过早损坏,整机结构简单,移动、装拆、维护保养方便。
具有效率高,性能好,消耗风量低等优点。
风动潜水泵主要有风动马达、水泵、油雾器、管接头、消音器五部分组成。.
Pneumatic submersible pump is mainly composed of pneumatic motor, water pump, oil mist, pipe joint and silencer.建立质量体系,重在务求实效.
Establishing a quality system focuses on seeking practical results适应能力强。适应于排放清水、浊水(泥浆、泥砂、 煤渣水)
Strong adaptability. It is suitable for discharging clean water and turbid water (mud, mud sand and cinder water)只要控制节流阀开启程序,即控制气体流量, 就可以实现无级调速。
Stepless speed regulation can be realized as long as the opening procedure of the throttle valve is controlled, that is, the gas flow is controlled.不受温度及震动的影响,安装、操作、简单
It is not affected by temperature and vibration, and its installation, operation and are simple.设有消音装置,维修方便,易损件小。
Equipped with silencing device, easy maintenance and small vulnerable parts.具有较高的起动力矩和几乎瞬时升到全速工作的能力
It has high starting torque and the ability to work at full speed almost instantaneously.产品质量无缺陷 顾客满意无抱怨
Product quality without defects, customer satisfaction without complaints泵潜入水下的深度不超过0.40m
输送环境PH值在4~10范围内
输送介质的温度不超过40℃
含固体颗粒的最大直径不超过3mm,其体积浓度不超过百分之2
工作环境温度(2-40)℃
泵动力用压缩空气,压力在(0.45-0.70)MPa范围内,并满足耗气量要求。
信誉来源于品质 品质来源于素质
Reputation comes from quality, quality comes from quality水泵型号 | 额定流量m³/hF | 额定扬程m | 工作气压MPa | 耗气量m³/min | 质量kg | 外形尺寸mm |
FQW20-25/W | 20 | 25 | 0.5 | 8 | 34 | 462×Ф347 |
FQW20-40/W | 20 | 40 | 0.5 | 8 | 34 | 462×Ф347 |
FQW25-50/W | 25 | 50 | 0.5 | 8 | 34 | 462×Ф347 |
FQW30-18/W | 30 | 18 | 0.5 | 8 | 34 | 462×Ф347 |
FQW48-12/W | 48 | 12 | 0.5 | 8 | 35 | 462×Ф347 |
FQW40-20/W | 40 | 20 | 0.5 | 8 | 35 | 462×Ф347 |
FQW50-25/W | 50 | 25 | 0.5 | 8 | 35 | 462×Ф347 |
FQW60-20/K | 60 | 20 | 0.5 | 8 | 38 | 610×Ф450 |